Query Regarding Renting a Pump
Requirements
My name is Gulnaz Valeeva, I’m a Facilities Engineer, ExxonMobil Production Company.
I am writing to you to enquire about possibility of renting a pump from your company. One of our affiliate (ADNOC) is searching a particular centrifugal pump for renting for one year.
Key Parameters for the new pump is summarized below:
• Rated Capacity: 1650 US GPM
• Total Differential Head: 792 feet
• NPSH: 25 feet
• Operating temperature: 160F
• Suction pressure: 69 PSIG
• Application: Crude oil transfer pump
• Specific gravity: 0.827
• Liquid: 92% to 100% crude oil/up to 8% sea water/Carry through of gas up to6% by volume of oil rate, contains chloride
• Type: Horz. Centrifugal (fixed speed)
• Prime mover: Electric motor (Ex d type)
• MOC: CS (Casing) and 13% Cr.
• Design pressure: Min. 675PSIG (so that the pump is suitable for pump no. 2 in series operation)
• Type of mechanical seals: Plan 53B
• NACE Compliance: Yes
• Location: Offshore platform
• Nozzle orientation: Side/Side
Operating/Design conditions are as follows:
Operating Temp : 100-160 ºF
Design Temp : 185 ºF
Operating Pressure : 350 psig or 620 psig (depending on whether pump works as 1st pump or 2nd pump in series)
Design Pressure : 675 psig
I look forward to hearing from you soon.
Best regards,
Gulnaz Valeeva
Facilities Engineer
ExxonMobil Production Company
22777 Springwoods Village Parkway, EMHC/W2.3A.278
Spring, TX 77389
+1832-6244-029 (office)
+1832-434-1622 ( mobile)
gulnaz.r.valeeva@exxonmobil.com
Posted on
21 Mar 2018 7 years ago
Buyer Details (Be An Elite Member To View Buyer Details)
Company Name
Exx*******************
Address
Abu Dhabi United Arab Emirates