Enquiry For Abattoir Equipments
Category
ABATTOIR EQUIPMENT PRODUCTS
Requirements
MEAT LOADING AND UNLOADING ARM WTH REVOLVING COLUMN
1. Maximum hook height: 2680 mm.
2. Minimum hook height: 820 mm.
3. Useful travel: 1860 mm.
4. Arm rotation: 260 degrees
5. Head rotation: 320 degrees
6. Total useful rotation: 350 degrees
7. Hook up and down speed: 0.3 m/s
8. Useful capacity: 300 kg.
9. Equipment class: A3
10. Voltage: 380 Volts three-phase
11. Power installed: 2.5 kW
BOOT CLEANING MACHINE
1. Mains connection voltage: 3 x 400 V, PE
2. Mains frequency: 50 - 60 Hz
3. Nominal current: 2,4 A
4. Nominal capacity: 0,75 kW
5. Control voltage DC: 24 V
6. Reactive factor: cos(phi) = 0,8
7. Conductor cross-section: 4 x 1,5 mm2
8. Water supply connection: R ¾ '' external thread
9. Water pressure: min. 4 bars, max. 6 bars
10. Water temperature: Normal Water in UAE
11. (+100°F), max. +43°C (+110°F)
12. Water consumption: ca 2 litres per cleaning process
13. Water discharge: R 1 ½ " HT-pipe
14. Machine weight: ca 80 kg
15. Sound level: <70db(A)
16. size: 675 x 670 x 1.190 mm, incl. tin 20l with Tin carrier
17. Control sensor located on Shackle working by touching finger
BOOT / CLOG DRYING PANEL FOR 10 PAIRS
1. with ozone disinfection for 10 pairs,
2. incl. hot-air blower walls mounted,
3. made of stainless steel 1.4301 wall mounted, size: 1.921 x 590 x 424 mm
4. Power supply 230 V, 50 Hz, 0,75 kW 2
5. Power socket 230 V, 50 Hz with safety plug Conductor
6. cross-section: 3 x 1,5 mm2
ELECTRO DIP MACHINE WITH AUTO GATE
SINGLE DOOR METAL LOCKER WTIH 10CM HIGH LEG
1. Dimension: H1850mm*W380mm*D450mm
2. Leg height: 100mm
3. Steel Thickness: 0.6-0.9mm available
4. Color: silver/gray
5. Surface Treatment: Electrostatic power coating
ELECTRIC CUSTOM BRANDING IRONS FOR INSTANT CARCASS STAMPING
Power: 400W (AC=220V)
Built-in adjustable temperature controller (RT-400 °C)
Stamps are interchangeable
ONE YEAR warranty.
Free replacement within warranty period. Stamp plate: 6 different stamp each
group of 3 group
made of brass and customize as approved design sample
stamp plate quantities= 18 plate
SLUDGE DRIER USING DISPOSABLE DEWATERING BAGS
Cycle of the filter bags. Once this cycle is over the filter bags will be removed sealed and stored in the open air for a further period of dehydration, reducing the weight and volume of the sludge cake. The special water repellent material of the sacks prevents rainwater from entering but allows dehydration of the contents by
evaporation. Modules can be fitted with a control panel which can automate the filling cycle and is also capable of controlling the pressurisation of the process. An
option which, if fitted, can maximize the filtering capacity of the machines. In common with other dewatering processes the selection of the best flocculant is an
essential prerequisite to achieving the optimum results. DESCRIPTION OF THE SUPPLY -three bags, closed on three sides, automatic, pressurized, pump feed, -
three baskets CSTIX01 to contain the bags expansion and to assist the bag removal, made of AISI 304L; A04 one bottom support grid for the bags, made of rectangular
section tubes, designed for the simple removal of the bags, made of AISI 304L; - one filtrate collection tank, with sloped bottom and DN 100 outlet port, all made of
AISI 304L;
Posted on
03 Jul 2020 4 years ago
Buyer Details (Be An Elite Member To View Buyer Details)
Company Name
Al *******************
Address
Abu Dhabi United Arab Emirates