Welded Razor Mesh
Category
RAZOR WIRE
Requirements
Ref.: Aqaba fence 6/ 2020
Date: 19/11/2020
Dear sir,
Please provide the following documents (as per consultant request)
1. Company profile
2. Certificates
3. Data sheet for the product include the following information:
o Your company contact information and LOGO: …….
o Product name: Welded razor mesh
o Blade type name: BTO 22
o Drawing: …... (shall show all dimensions).
o Some photos: (shall show packing and whole...etc.)
o Total length: 12000 twelve thousand meters
o Total quantity: 25000 m2
o Wire diameter: ……. (must be greater than 3mm)
o Blade thickness: ……... (must be more than 0.5mm)
o Galvanization: fully galvanized
o Zinc coating density (g/m2) for both wire and blade: …... (must be more than 100g/m2)
o Electro or hot-dipped galvanization: …….
o Mesh hole size: 7.5*15 cm
o Height: 2.1 meters
o Panel length: ……. (no restrictions for the length but shall be mentioned).
o Origin and loading point: …….
o Time of fabrication and delivery in Aqaba-Jordan: ……...
o How would be the resistance to climate conditions: …… (if possible)
My best regards
Projects Manager
Engineer Mohammad Ghabashneh
Phone/ WhatsApp: 00962772111135
Posted on
19 Nov 2020 4 years ago
Buyer Details (Be An Elite Member To View Buyer Details)
Company Name
JET*******************
Address
Amman Jordan