Stainless Steel Stockists, SS Rebars & Fasteners, Plates Arminox is one of the worlds leading suppliers of stainless steel reinforcement for use in the construction industry all over the world. Our strength lies not only in the steel, but particularly in our great experience and know-how. This relates to both the development as well as intelligent use of stainless steel reinforcement.
Therefore we know all about the importance of good and long lasting partnerships with our customers, as well as the need for choosing first class materials.
Arminox is certified in accordance with recognized international product standards, and Arminox stainless reinforcing steel can be used for new buildings and renovation purposes in aggressive environment, where damage to concrete structures occur.
Internationally Arminox was among the first to develop greater awareness and understanding of stainless steel reinforcement. Our products and know-how develop constantly, for instance through cooperation with national and international research institutions, consulting engineers, and steel manufacturers.
Our Products summary:
The reinforcement products are available in four qualities, namely Duplex 1.4362, Duplex 1.4482, S316S33 (1.4436) and Duplex S318S13 (1.4462), and can be delivered in straight bars, stirrups or a welded. ARMINOX invoice on cut and bend rebars benefit around 10% Stainless steel on scrap and the cut and bend rebars are supplied to site as per work in progress which also allows best cash flow impact.
SS COLD ROLLED REINFORCEMENT: Cold reinforced or straightened in bars. Thickness :4,0 mm 14mm
SS HOT ROLLED REINFORCEMENT: Reinforced bar chot rolled, straightened and cut in bars. Thickness: 16 mm-50mm
We also supply good quantities of other Stainless Steel products of types including such as:
SS HOT ROLLED FLAT BARS Hot rolled profile in rectangular section. Thickness: 8 mm 40 mm
SS REINFORCEMENT BAR IN COILS Reinforced bars in coils. Thickness: From 4 to 40 mm in coils
STAINLESS REINFORCEMENT WIRE Cold rolled wire with four ribs. Thickness: 3mm -14 mm
COIL / SHEET ENGRAVED (FLOOR PLATE) Engraved hot rolled, annealed and pickled. Thickness: 3 - 9,52 mm
MIG/TIG/Welding SS wires
FABRICATION WORKS: For SS ladder, SS 316L Flat Bars, SS Plates SS Fasteners email@example.com firstname.lastname@example.org H Page: www.arminox.com